1 / 13
Universal Monitor Phone Mount | Webcam | Droidcam — zdjęcie 1
1 / 13

Universal Monitor Phone Mount | Webcam | Droidcam

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This (sightly overengineered) design allows you to mount (almost) any common mobile phone on a vast variety of monitor..

Ocena
4,25 / 5
Polubienia
64
Pobrania
309
Wydruki
4
Wyświetlenia
3811
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This (sightly overengineered) design allows you to mount (almost) any common smartphone on a vast variety of monitor frames. I use it primarily in conjunction with the android app Droidcam to use my smartphone as a webcam when I take part in an online meeting, but I'm sure it's also suitable for other applications.

The mount can be customized in several ways:

  • With the upper countersink screw, the phone bracket can be adjusted from 100.5 mm to 180 mm in order to fit your mobile phone.
  • You can also turn the entire bracket to adjust its yaw.
  • Use the rear (thumb)screws to adjust the mount's pitch.

Required Hardware:

  • Pitch joint: 2x 16-25 mm M3 counterbore screws + 2x M3 hex nuts (I also recommend these M3 thumbscrew adapters by Elothan)
  • Yaw joint: 1x 16 mm countersink screw + 1x M3 hex nut (lock nut is best)
  • Phone bracket: 2x 6 mm M2 counter bore screws (Optional - They just align the bracket parts)
  • Some rubber or foam tape to add a little more friction to the mount's contact face

Printing:

  • Solid filament (PETG worked well)
  • 3+ perimeters
  • 0.4 mm nozzle
  • No supports (take care to keep the predefined orientation of the pitch clamp)
  • ≤ 0.20 mm layer height

History:

  • 23-07-07: Initial release
  • 24-11-07: Fix pitch clamp nut height (Thanks A Jolly and st.schgr)

Tagi