1 / 1
Covers/parts for hydroponic systems like idoo 12 or similar — zdjęcie 1

Covers/parts for hydroponic systems like idoo 12 or similar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Selection of parts for tabletop hydroponic systems like the idoo 12. Algae blocker, seedling hat, hole cover,

Ocena
5 / 5
Polubienia
25
Pobrania
205
Wydruki
1
Wyświetlenia
739
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

These parts were designed for use on an iDoo 12 desktop hydroponic system, but should work with any systems using 30mm/1.18" holes.

Algae Blockers (no more stickers)

These reusable algae blockers replace the single-use stickers that are sold with the system. They stay centered on the basket, and are split down the middle to allow for removal or changing. 

Print in opaque plastic to block light. Larger center holes are available so they can be changed out on larger plants as the stem grows (4.25mm matches original stickers).

Empty Hole Covers

Use these to cover empty holes. My system only came with six covers, and sometimes I need more. 

Grow Dome

Replacement for lost or broken grow domes to maintain light and moisture. Print with transparent filament in vase mode with a single bottom layer to allow as much light through as possible.

 

Tagi