T Bracket 1.5 in Lumber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket for joining two pieces of 1.5 in (38mm) lumber together with 5mm screw holes.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to reinforce 1.5 in (38mm) lumber under the dinette seats in my travel trailer after the staples securing the cross members that supported the plywood started to come loose. The 5mm counter sunk holes should accommodate most appropriately sized wood screws.
I printed it in ASA with a 50% infill. Time will tell how well it holds up.
I am no pro and I realized after designing it, that if I had oriented the item differently in fusion, it probably would have defaulted to the correct orientation for support free printing. The one of the photos (largest surface down) is how I recommend printing it.