Raspberry Pi 4 mount with Armor Heatsink and SSD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for a Raspberry Pi 4 having an Armor Heatsink, with a 2.5" SSD drive to attach to 4040 extrusion.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 737
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SSD's are much more reliable and much faster than SD Cards, so I boot my Raspberry Pi 4 running OctoPrint or Klipper from a small SSD. As I couldn't find a suitable mount that incorporated an SSD, I decided to use it as a learning experience and design my own in Fusion 360.
As I also run a passive "Armor" heatsink, I designed the mount to completely replace the bottom plate and utilise the existing screws. You will need some screws for the SSD though.
The resulting model isn't perfect, but it works. I have included the the Fusion 360 source file if you wish to modify it to suit your needs.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2 Neo
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
20%
Filament:
Black
Category: 3D Printer Accessories