1 / 2
Mellow NF Crazy cover with PINDA holder — zdjęcie 1
1 / 2

Mellow NF Crazy cover with PINDA holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix cover for the Mellow NF Crazy hotend mount by András Bognár with a moved PINDA probe

Ocena
0 / 5
Polubienia
0
Pobrania
19
Wydruki
0
Wyświetlenia
164
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Printing instructions:

I found that it's better to print it as it is oriented (flat face looking up) and using the “organic” supports available in Cura or PrusaSlicer 2.6

Layer height: 0.2mm

Material: ABS but PETG should be fine

- - - - - - - - - - - - - - - – - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

I found out that my PINDA overheated in its original location and didn't produce good readings.

!!! YOU NEED TO REFLASH THE FIRMWARE !!!

Download the latest version from Prusa's Github

In “Prusa-Firmware/Firmware/variants/”  you select the right version for your printer and search for these lines: 

And set them as I have (X offset: -26; Y offset: -36), then follow the instructions on the Github to recompile your firmware and flash it to your printer.

 

Big shoutout to András Bognár for the original model and posting the fusion 360 files.

Tagi