1 / 2
Mellow NF Crazy cover with PINDA holder — image 1
1 / 2

Mellow NF Crazy cover with PINDA holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix cover for the Mellow NF Crazy hotend mount by András Bognár with a moved PINDA probe

Rating
0 / 5
Likes
0
Downloads
19
Makes
0
Views
164
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Printing instructions:

I found that it's better to print it as it is oriented (flat face looking up) and using the “organic” supports available in Cura or PrusaSlicer 2.6

Layer height: 0.2mm

Material: ABS but PETG should be fine

- - - - - - - - - - - - - - - – - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

I found out that my PINDA overheated in its original location and didn't produce good readings.

!!! YOU NEED TO REFLASH THE FIRMWARE !!!

Download the latest version from Prusa's Github

In “Prusa-Firmware/Firmware/variants/”  you select the right version for your printer and search for these lines: 

And set them as I have (X offset: -26; Y offset: -36), then follow the instructions on the Github to recompile your firmware and flash it to your printer.

 

Big shoutout to András Bognár for the original model and posting the fusion 360 files.

Tags