Riser for laptop, keyboard or other devices!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print is designed to fit nicely onto a 250mm build plate! Increase the tilt angle of any device such as a laptop!
- Ocena
- 4,8 / 5
- Polubienia
- 54
- Pobrania
- 587
- Wydruki
- 5
- Wyświetlenia
- 1673
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Print this on any printer without supports
File contains left and right side riser support that I used to increase the tilt angle of my laptop.
This would also be useful to tilt any similar flat device such as a keyboard or tablet etc.
This took me approx 3h to print with 25% infill and standard settings but could be quicker if these settings are optimized for speed.
This is a durable and easy to print design that does not require supports.
I have included .Gcode print file for use with Bambu X1C.
The .Step file can be used to modify the design, and slice it for your own printer.
Download - Print - Done!