Isopropyl Bottle Nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nozzle to allow easy pouring of isopropyl alcohol
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 400
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I use the Solimo Isopropyl Alcohol from Amazon Basics. I usually put a tiny hole in the foil seal to allow the alcohol to drip out. Sometimes the foil tears, leaving a hole that lets too much alcohol out with each use. Rather than continuing this waste of alcohol, I've modified Higglyblarg's Threaded Nozzle Tip to fit the Solimo bottle. Now I get only a small stream with each use.
The original model was widened by 5% and the space above the threads was increased by 4mm to fit the bottle. Above the threads where the model begins to taper, I also added a small lip to prevent alcohol from leaking around the threads.
I printed the model inverted to prevent the supports from mingling with the screw threads. In my tests, the support created a rough surface within the screw threads that prevented the model from fitting on the bottle correctly.