69 modeli
This model holds the basic isopropyl alcohol bottle you get from stores like Walmart and attaches to the Honeycomb Storage Wall. I printed it with the Ender 3 v2 and used Cura as the slicer. With the honeycomb/hex container, it printed…
I wanted a shelf built specifically to fit my bottle of isopropyl alcohol for the Honeycomb Storage Wall. Both of the bottles I had in my house were ~ 80mm square, so I made this as a 84mm square to give an “easy fit” (with some sexy…
Add convince store alcohol bottles to gridfinity. It fits standard sized 65x65 mm square bottles. This has a gridfinity footprint of 2x2 units. The example was printed in 3DXTech orange PLA at 0.20 mm.
I just needed a way of storing my Isopropyl cleaning wipes. I looked around on Thingiverse did not find anything that matched what I wanted, so I quickly made some measurements and created this storage box / Dispenser. The Swabs Measure…
This remixes a 32oz 80x80mm IPA holder for a pegboard (which is a remix of a smaller holder) and adds IKEA Skadis mounting pegs from the Fluke 87 V multi-meter holder. The mounting pegs are a bit tight. I clipped the corners to help them…
Wanted to hang my isopropyl alcohol on my WallControl Peg/Slot board. Made this remix to do that. Note: the part named “2x3 Spacer blank flush” is optional. I thought I would need it but it's not really necessary. You can still put it all…
Easy to print Isopropyl Alcohol Bottle holder for the Multiboard system. Holds a 32 FL OZ Bottle using Multiconnect system by @DavidD
A threaded screw-on spout for the 5-gallon isopropanol drum from McMaster-Carr. Several spout designs available. Still in testing.
Fits the 32oz bottle (78mm x78mm base) plus a little tray / shelf for the swabs I use. Printed with no flaws - about 7hrs print time with the settings I used. Hope you Enjoy! 0.20mm from a 0.4 nozzle 15% gyroid infill Supports on the back…
Inner dimensions are 81x81mm to account for some bulge, holds any bottle that is 80mm square and has chamfered edges.
simply print the bot mounts to secure the part
Holds a quart Isopropyl Alcohol container, 82mm x 82mm, to a 1" spaced ¼" pegboard. Remix of @MakeAnything Devin Montes's Isopropyl Alcohol Pegboard Mount (found on MyMiniFactory and modified 12/17/22) to save 5g of filament and look…
This dispenser fits the Halsted Health 99.9% isopropyl alcohol wipes that are used to clean the 3D print bed print surface. Here is a link to the exact wipes that fit perfectly. https://amzn.to/3AiEgaW In the model file, I have removed…
I use the Solimo/AmazonBasics Isopropyl Alcohol Spray ( 1 bottle , multipack ) and wanted a clean way of storing the spray bottle and the cloths I use to clean the bed. I clean the bed before every print, quick spray and wipe down while…
I use the Solimo Isopropyl Alcohol from Amazon Basics . I usually put a tiny hole in the foil seal to allow the alcohol to drip out. Sometimes the foil tears, leaving a hole that lets too much alcohol out with each use. Rather than…
Was tired of misplacing my bottle of Isopropyl Alcohol near the printing area resulting in always needing to look for it! So here is a holder that I made for the 99% Isopropyl Alcohol bottle that you can get from Superstore (Loblaws).…
for the equate brand or i think the standard US iso alc bottle
A clean build plate is a happy build plate and my favorite way to clean my PEO/PEI, etc. build plates is lint free cotton rounds (found in the makeup section of any mega/drug store, don't cheap out - get the “lint free” ones, they are…
This is a tower to hold a pump bottle for IPA and cotton rounds. It can hold a bottle roughly 60mm round and 120mm tall. I use them to clean my build plate. Print instructions There is a separate top and bottom to print then super glue…
This just mounts my build plate cleaning materials on the wall right next to my 3d printer. Hope you enjoy it! If I remember correctly this should use m3 screws. Get back with me in the comments if you find otherwise. Category: Organization
I use the larger bottles of isopropyl to clean my build sheet. Seems fine printed in PLA, 20% infill. I've included two presliced profiles, one for Prusament PETG, and the other for generic PLA. These use 2.6 Alpha 3 Organic supports…
I use a MG Chemicals Isopropyl Alcohol Spray Bottle to clean my build plate between builds. It was just sitting on top of my enclosure so I made a mountable bottle holder for it. In case it helps others, the diameter of the bottle is 63.1…
Came out nicely for me when printed with a 0.8mm nozzle w/ 0.4mm layer height.
Simple remix for holding a 10oz spray bottle of isopropyl on the Ikea Skadis. I based this from a hook template found here and the Chep spray bottle holder ( 10oz IPA Spray Holder for Ender 3 V2 Styl | 3D model | Thangs ) over on Thangs.
A Skadis mount to hold CA Glue/Gluestick/Isopropyl and some extras. Uses t-nut mod from 6d6178 (https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards).
4x4 Gridfinity bin that holds a <67mm square bottle of isopropyl and a hex scraper with nice stepped holes.
A pegboard holder for a 16oz (473ml) rectangular bottle of isopropyl alcohol and some q-tips.
I liked the design of the original, so I modified it to fit my specific use-case. Who knows, maybe it'll be useful to someone? There's extra space for a wire snipper, and a bottle of isopropyl alcohol. This is a bottle bought in Denmark,…
A threaded screw-on cap for the 5-gallon isopropanol drum from McMaster-Carr. A rough FreeCAD model of the neck in available as well.
A 2x2 Gridfinity storage bin for a 16 oz. bottle of Isopropyl Alcohol. Inside dimensions for the bottle are 65x65mm.
Just a basic bottle holder that fits in the SKÅDIS peg board. Can be used for anything, but was designed to hold the 32oz bottle of iso alcohol from Equate. Supports on everything are required for the top hooks to properly print.…
Modification of my previous version. There was a request ( @SaintsReturn_5049 ) for a smaller one that fit a 66mm X 66mm bottle. Have not printed this one yet, but I think it should work? Hope you Enjoy! 0.20mm from a 0.4 nozzle 15%…
32 ox Isopropyl Alcohol Holder for Honeycomb Wall (HSW)
This remix of the isopropyl alcohol holder 16oz is made for the Multiboard system. It is attached to the wall using whichever flush snap you would like using two Mid Thread - Lite Fix Point ( https://than.gs/m/1322926 ) screws or the…
Wall bracket to hold a spray bottle of isopropyl alcohol next to 3D Printer. Can be printed without supports. Sized for “MG Chemicals 99.9% Isopropyl Alcohol Electronics Cleaner, 475 mL Liquid Spray Bottle” from Amazon.com.
I use IPA as a coolant/lubricant for my CNC machine when working with aluminium. I drew up this IPA bottle holder to attach a 1 liter IPA bottle to my gantry, but it really could be used anywhere you want to "hang" an IPA bottle. They…
Skadis mount I made for a 16 ounce bottle of IPA. Uses the M3 skadis t-nut mounting system found here: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb Happy printing!
Designed in Tinkercad for a Bottle of Isopropyl Alcohol Spray with a Diameter of 65mm. Holds perfectly on Ikea Skadis.
62mm Bottle holder for HSW Bambu Lab PETG-HF Orange 0.2mm Layer Height Infill 15% Gyroid Arachne Tree Support Adapter to HSW: https://makerworld.com/en/models/174221#profileId-191522
This remix of the isopropyl alcohol holder 16oz is made for the Multiboard system. It is attached to the wall using whichever flush snap you would like using two Mid Thread - Lite Fix Point ( https://than.gs/m/1322926 ) screws or the…
Extended to have a place to put the isopropyl alcohol. Made for 86mm diameter bottle. Step file attached to adjust to your liking. (picture shown was printed in 2 hours using 5.0.0-RC input shaper on MK4)
Isopropyl alcohol and foam qtip holder
Just another place to hold a Walgreens Isopropyl-Alcohol bottle with a few other slots for the basic tools and a sharpie marker. It can be attached to the IKEA Lack enclosure for fast access to your tools.
wonder where to put your Isopropyl bottle ? here is my magnetic holder , for the CORE One. You will need one 25x5mm Magnet and some bottles if you don't already use these…
A simple bottle holder for ISO. I used double sided tape to stick it to my printer. Printed on its back with tree supports.
Holder for Equate Alcohol 91 %
Printed in PLA, 0.25mm layer, 20% infil
Somewhere to put your spray bottle for cleaning the build plate
A two-piece holder for my bottle of IPA. Cup dimensions: 65mm diameter, 90mm tall 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01
Simple sign ISOPROPYLALKOHOL/ISOPROPYLALCOHOL.
Isopropyl spray holder with hook to insert under AMS
Isopropyl Alcohol Spritzer Refill Funnel This is a small, loose-fitting funnel I created specifically for Meijer store-brand isopropyl alcohol spray bottles, but the dimensions may work well for other brands. The funnel is designed to…
A simple container for storing about 15 IPA swabs (50mm x 50mm) that doesn't take long to print. It took around 45 minutes on my MK3.5S using PETG and 0.25mm layer height.
Stand for Isopropylu by Nanobala inner dimensions 86 x 48 mm , inner height 32 mm -> so you can resize at slicer for your needs use PETG layer 0.2 - 0.3 mm no supports needed
Stampato in PETG , ci sono 2 modelli uno con etichetta e l'altro senza etichetta
This tube holder is an accessory for Peristaltic Pump Housing . It holds the tube so it doesn't go in to the dirty stuff of decanted iso.
A simple box/shelf to hold a box of isopropyl wipers ( 103 x 55 x 50mm) on a honeycomb storage wall. Can also be used to hold other light stuff.
Skadis remix for a 10oz spray bottle of isopropyl
Easy to print Isopropyl Alcohol Bottle holder for Muscle Rack. Holds a 32 FL OZ Bottle
Transform your standard Isopropyl Alcohol bottle into a convenient spray bottle for quick and effective print surface maintenance. I designed this adapter to bridge the gap between common household spray heads and the standard threads…
A simple gridfinity bin for large bottles of IPA. Highly suggest you print with high infil or glue the bin, as otherwise you could remove the bin alongside the bottle. If only I made a magnet baseplate and used magnets xD
This is a simple side mount that sits on the floor next to your Anycubic Kobra S1 Combo and tucks right against the printer’s frame. It keeps three workshop essentials within arm’s reach: a jet blower lighter, a 3DLAC adhesion spray…
This is a simple siphon method to clean resin from IPA using a sintered bronze filter. I have been able to filter and reuse IPA 3 - 4 times before it becomes too contaminated to be useful. I used 24" of 3/8 copper tube and a sintered…
N-isopropyl-N'-phenyl-p-phenylenediamine (C15H18N2, CAS 101-72-4) — a free educational 3D molecular model for teachers and students, by MolGod.org. Symbols are engraved into every atom, so students read atoms by symbol, not by colour.…
Stampato in PETG , ci sono 2 modelli uno con etichetta e l'altro senza etichetta
Isopropyl Alcohol Spritzer Refill Funnel This is a small, loose-fitting funnel I created specifically for Meijer store-brand isopropyl alcohol spray bottles, but the dimensions may work well for other brands. The funnel is designed to…
Transform your standard Isopropyl Alcohol bottle into a convenient spray bottle for quick and effective print surface maintenance. I designed this adapter to bridge the gap between common household spray heads and the standard threads…
I was surprised when the vast majority of “wash bottles” available on Amazon didn't come with a cap. Since I was going to be storing Isopropyl Alcohol in mine and sitting it next to my printer to wash off filament plates, I wanted to try…
