FLSun v400 - Isopropyl Alcohol Spray Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A side rail mount for a Solimo/AmazonBasics spray bottle container and some cloths
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 462
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I use the Solimo/AmazonBasics Isopropyl Alcohol Spray (1 bottle, multipack) and wanted a clean way of storing the spray bottle and the cloths I use to clean the bed. I clean the bed before every print, quick spray and wipe down while the bed is still cold.
Box area is 84mm x 42mm and its 28mm deep.
Don't try to spread the arms into the channels from the side. Go from the top and and just give them a gentle tug to get started, then slide the holder down the channel to your desired height.
No supports or brim requried, I did around 30% gyroid infill.
Obviously be fully aware that Isopropyl Alcohol is extremely flammable, should your printer have a thermal runaway that ends in a fire, you have essentially attached an accelerant to the side potentially making the fire much worse. Use this at your own risk.