FLSun v400 - Isopropyl Alcohol Spray Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A side rail mount for a Solimo/AmazonBasics spray bottle container and some cloths
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 84
- Makes
- 1
- Views
- 462
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I use the Solimo/AmazonBasics Isopropyl Alcohol Spray (1 bottle, multipack) and wanted a clean way of storing the spray bottle and the cloths I use to clean the bed. I clean the bed before every print, quick spray and wipe down while the bed is still cold.
Box area is 84mm x 42mm and its 28mm deep.
Don't try to spread the arms into the channels from the side. Go from the top and and just give them a gentle tug to get started, then slide the holder down the channel to your desired height.
No supports or brim requried, I did around 30% gyroid infill.
Obviously be fully aware that Isopropyl Alcohol is extremely flammable, should your printer have a thermal runaway that ends in a fire, you have essentially attached an accelerant to the side potentially making the fire much worse. Use this at your own risk.