Counting matching models…
As my printer is located on desk with original enclosure I designed side spool holder. Central cylinder is for spools with 55mm central hole. I used aluminium stick 8mm for cylinder, but also there is file for spool sticks, please use…
Eco Turbo Fan - FLSUN V400 I designed a kit to mount the BIQU eco turbo fan kit on the FLSUN V400. I started from the fun duct by Robert_Klotz (https://www.printables.com/model/725525-flsun-v400-cpap-duct) modifying it and improving some…
Printed using ESun PLA+ Light Brown and Black Tank itself needs supports print it where the top is facing upwards Super glue is required as well Raw un-melted filament for the gun Made for keychain and desktop display Discord for updates:…
As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im selling 1 for $5 SGD, shipping depend on where u are ( u may need to get alot of them for it…
I was desperatly searching for a mobile mount for my speederpad but didn't find any so i decided to build one. The very nice and solid Tower mount clip credited to @YosiYaffe https://www.printables.com/@YosiYaffe was a huge time saver.…
I changed the angle of the camera end of the mount to be perpendicular to the radius of the build plate. Now, the front of the camera and the front edge of the mount are parallel. I used PETG at 0.2mm layer height and 15% Gyroid infill,…
Gedruckt in PLA+ schwarz, Layerhöhe 0,2mm. Kein Brim, keine Supports erforderlich. Zur Befestigung werden jeweils sieben Stück Messing-Gewindeeinsätze M4x8,1x6,3 sowie Tellerkopfschrauben M4x12 benötigt.
A remix that allows the left USB port to be used (if you moded the case to expose the left USB port). It's otherwise exactly the same as the original. Print with tree support, bed only. probably best to print with PETG. May interfer with…
I needed a build plate stand for the V400, but I did not find one. In this case, I modelled a 2 in 1 solution. You could use it to V400 + 2pcs of any buildplate. (like Bambulab in the pictures.) The round V400 build plate is fits…
Wanted a mount for a webcam, thanks to Blackbird for the design idea. Left room for an indexer too. It fits but not tight, so I added a dab of glue.
A beefier version of idler holder for V400. See original model for more details
I'm really sick of gatekeepers, so I made this profile of the side of the printer in order to design my own doors/enclosures/accessories for it. No more paid files to later find out they don't work for you. I will be working on some of…
Printable top skirts and corners to allow raising the top plate up, allowing for better airflow and electronics placement. Integrated HBB and Knomi 2 into the front skirt to allow custom macros and info at the touch of a button.
Basically a remix of the aforementioned file, I liked it to be "in line" with my printer and my OCD was killing me. Enjoy
If you have an idea for a glue or tool holder?? Write to me :) Universal Mount - print time 39min. (PETG, ASA, PCTG) Glue and tool holder - print time 1h 11m (PLA… and can be printet in almost any kind of filament) Glue stick size 23,6mm…
I looked for a better way of mounting the Speeder Pad on my FLSun V400. Thats what i use for now. Printed with PLA+, 50% infill and triangle pattern.
Flsun V400 arm widening pliers Makes it easy to unhinge the spring loaded ball joint to do maintenance. Printing / mouting Print with side down (see pictures). No supports necessary. Example pliers Printed using generic gray PLA. Approx…
Introduction This model allows for the use of dual 5015 fans on the FLSUN v400. The dimensions were based on ChrisCampbell 's FLsun v400 Cooling Fans 5015 Adapter and Nyndroth 's remix . The front fan cover remains unchanged and also…
Création de galets sur axe, mise à jour d'une création existante, Modification taille de cône Ajustement longueur
Support qui s'accroche directement sur le bati de la machine, 100% fonctionnel Ne nécessite pas de support (no support) pour l'impréssion Impression : Couche 0.2 Remplissage 30% Vitesse max 400mm/s
As my printer is located on desk with original enclosure I designed side spool holder. Central cylinder is for spools with 55mm central hole. I used aluminium stick 8mm for cylinder, but also there is file for spool sticks, please use…
Why me make: My printer is on a high table with the spool holder nearly touching the ceiling. This makes it quite difficult to change. Therefore, I designed this, a basic guide for the PTFE tube to be curved around without any sharp…
Use this model in conjunction with https://www.printables.com/model/574548-bigtreetech-pad-7-mount-for-articulating-arm
Check out this fanduct! Made this after an unfortunate series of events caused my original 4010 fans to melt while removing a blob of plastic from them. After replacing the 4010 fans with cheap ones from Amazon and those fans burnt out i…
In my workshop there is not so much space that I can afford to have a tangle of cables and a movable display on my desk, I also often use large rolls of filament which are impossible to mount on top of the printer. To solve these problems…
teste sa fonctionne pour moi pour aller avec : https://www.printables.com/model/488753-flsun-v400-enclosure-door
Hello everyone I needed to have a support wall for my 3d printer tools. I noticed that the Ikea skadis panel fit very well, so I decided to create supports that would hold it without making changes or drilling holes. I hope you like it…
English version: Introducing the waste box for the FLsun V400 3D printer, which consists of two parts that need to be glued together at the modified groove. This design ensures easy assembly and stability. The box is designed for…
This is a simple adapter that allows the load cells of luggage scales to be used to re-tension the GT2 belts. It respects the shapes of the v400 extrusions.
Updated this model from the previous version not cooling the parts as efficiently as I wanted. This version features more straightforward porting to apply the air to the part itself.
I Just adjust the screw to be in the best print position and make it more hard and secure to the arm. Printed with 30% infill and 3 walls. Remember, its a joint and you dont want a webcam fall.
This is a mod for the FLSUN V400 effector to accept a dragon hotend, a customized WWBMG extruder, and a remote-actuated filament cutter. Sources: https://www.printables.com/model/580837-effector-plate-flsun-v400…
i assembled the “Universal turbo kit” and i must admit its amazing. i was inspired by @twin.shepherd.printing tiktok of assembling something like this and went to “experiment” myself (thanks dude) but everywhere i looked, i needed to dig…
Eco Turbo Fan - FLSUN V400 I designed a kit to mount the BIQU eco turbo fan kit on the FLSUN V400. I started from the fun duct by Robert_Klotz (https://www.printables.com/model/725525-flsun-v400-cpap-duct) modifying it and improving some…
Et voila un support pour attacher un bac à la structure de la FLSun V400 La version d'origine était très bien, mais j'avais un bac en plastique en stock, c'était plus rapide que d'en imprimer un. Le fichier STL est un exemple, il suffit…
was kind of tired of locating the build plate on my V400, (its not bad..but..) so I practiced some more drawing and came up with this. I will add 2 sided tape to lock it in place.. but it works as is.
Hi, anyone who has a Sunlu S2 knows the problem when you want to print directly from the dryer. The filament somehow "jams." If you also have a Flsun V400, it gets even worse. I've now found a easy solution for combining the two. The…
A simple clip-on hair spray bottle holder for the FLSUN V400. The included STL/STEP files fit a ~57 mm diameter bottle, but included is the Fusion 360 file, complete with a parametric option for the bottle size.
This door/enclosure is designed to use minimum additional parts, and simply snaps together utilising the joints created by NeedItFixIt. The joints snap together providing for a solid door. Tolerances are quite tight for this so make sure…
Stand to hold your build plates. If, like me, you have too many build plates for your FLsun and need something to keep them more organized than leaning them against the side of a nearby vertical object, this is the print for you. The 4…
An enclosure for the FLSUN v400 printable in ~1.5 hours. Use what you've got (cardboard, etc.)An enclosure for the FLSUN v400 printable in ~1.5 hours. Use what you've got (cardboard, etc.) for further details check out the original
After a lot of testing, tweaking, and community feedback, I’m proud to share my well-tuned OrcaSlicer profile for the FLSun V400. This profile has been a long time in the making, and the results truly speak for themselves – smooth walls,…
I took Robert Klotz's model and reverse engineered it the best I could. The loft for the lower portion of the ducts was hard. It's not perfect but it's close enough. Then I modified the outlet so it is angled more inward, based on…
If you have weak hands like me or just want to make life a little easier on yourself, print three or six of these bad boys. Makes it so much easier to remove the toolhead to work on it, and to replace it afterward. Also great for…
I've needed a display mount for my V400, that is standing on the floor, so i came up with this model, the display here has a 30-degree tilt back for a better view. There are several screw holes and rounded edges, so the entire model looks…
Each door can be hold by up to 10 round d12mm magnets. In my case 4 pcs d12x6mm was enough. Magnet holder is the part where you put same d12mm magnets with the opposite pole facing magnets in the door and install it into the printer's…
Soporte articulado para camara https://amzn.eu/d/dnfBjvV IMX335 , para FlsunV400. A tener en cuenta hay dos vínculos que llevan un tornillo con tuerca de M5 y luego hay un inserto de m4 en la base de "firts nude", "sop CAM" va con…
I'm working on a mount for a new hotend for my V400, and needed a model of the end effector plate. No one seemed to have one available to download, so I made this. It's based on a picture and some measurements with calipers, so I can't…
This holder is compatible with the GÖTZE & JENSEN HV400
FV4005 Wall Socket/ Outlet Decoration Cool design for every tank fan, everything is on one print plate. Body with cannon glue together (I used super glue) Happy printing :) Parameters: 3 mm height Body - 254.8 mm x 170.5 mm Cannon - 215.6…
Pushbuttons for that great guitar! Print pearl white or pearl ivory PETG and polish by hand or ABS and acetone vapor polish it, no supports needed
Remix of the amazing design from Jonathan Pyles! Thank you for your work! :) BEWARE! This Remix will not work with the OEM-Enclosure! I just changed the position of the screws so that the filament dryer is shifted more to the back and the…
Vented Riser for the V400 Electronics Bay ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward…
This is a top corner cap replacement for the FLSUN V400 that allows you to mount the Speeder Pad display at the top of the printer using the popular Speeder Pad Display Holder Upgrade. What’s included: - Top corner mount that replaces one…
These are replacement extrusion end caps for the FLSUN V400, designed to support enclosure panel mounting while maintaining a clean, factory-style look. The caps replace the stock extrusion ends and provide flat mounting surfaces with…
Brackets including a strain relief and hole for a DS18B20 Temperature Sensor, to measure the temp of the extruder motor because of heated chamber. Fan duct also available using a hose. Also with deepening for the BTT ADXL Sensor, mounted…
Printed using ESun PLA+ Light Brown and Black Tank itself needs supports print it where the top is facing upwards Super glue is required as well Raw un-melted filament for the gun Made for keychain and desktop display Discord for updates:…
As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im selling 1 for $5 SGD, shipping depend on where u are ( u may need to get alot of them for it…
Print enjoy 100% no supports for the FLSUN V400 scale to 122% and fit great! this half ring fitted way better than mine so remixed it. I remixed it again, made it taller and a bit shorter I made the holder thinner and a support piece to…
We designed a camera mount for the FLSUN V400. There is a Version for the left and the right front profile. The mount can be simply clipped on the profile. Printed on the FLSUN V400! Find it in our shop here:…
Front panel for Flsun SR with led mounted with an official raspberrypi screen 7" screen ( with STL there is a version without screen ) Easy to install with 4 neodyme magnets 10mm diameter x 2mm thickness
ADXL345 Mount for FLSUN V400. A longer screw is needed to fix it.
Adjustable Spool Holder for FLSUN V400. No support needed. Necessary : - 4 x M3x20 - 4 x 608ZZ Ball Bearings - Glue
A modification for triangle lab adxl (larger board with usbC connector). link. FOR SR: Modified to be mounted permanently. Leveling switch is not obstructed and sink fan exit is mostly free of obstructions. BlownUp: thanks for preventing…
Improved FLSUN V400 Fanduct Note: Fans are glued to stock fanduct but they can be peeled off easily with a cutter blade. Edit 05/11/22: New Fanduct allowing an overhang of up to 70/75° to be achieved
This quick edit allows you to use a ¼" screw to mount a camera or webcam. The hole is 10mm to give some wiggle room. for minor adjustments if needed and used a plastic washer. I printed it with 4 walls and 40% cubic infill and it's pretty…
Simple Holder for FLSUN V400 Display. Holder has a 10° Slope Just needs: 4x Bolt - DIN 912 M3 x 10 4x Nut - DIN 985 M3 - Nut
Simple Holder for the cables of the FLSUN V400 Column. Just needs: 2x Bolt - DIN 912 M3 x 10 2x Nut - DIN 985 M3 - Nut 2 Cable tie
Simple Holder for FLSUN V400 GoPro or Webcam Just needs: 2x Bolt - DIN 912 M3 x 10 2x Nut - DIN 985 M3 - Nut 1x Bolt M5 x 20 or GoPro Bolt 1x Nut M5 - ISO 4032 1x Cable tie
Change to a 92mm 24V fan to make the power supply much quieter. With this mod the PSU does NOT fit inside the V400 base, it is placed externally in a safe place. Uses eight M3 thread inserts. NOTE: The V400 can have a different PSU unit…
The original setup is quite loud as the airflow from the fan is max disturbed by the case itself. There are people that just cut the metal and make a big hole...that should work to but I like to make changes reversible. I decided to put…
You can get the FYSETC Portable Input Shaper here: Aliexpress:…
FLSUN V400 FYSETC Portable Input Shaper Mount A longer screw is needed to fix it.
Enclosing Flsun V400 is fairly easy because of the extrusion slots on each pillar. I have designed top/bottom caps for the side walls and now I'm working on the door and hinges. How to build the sides: Print 2x the STL and 2x mirrored…
Its a start for using the rails to make an enclosure or whatever ;) I added the Fusion file for everyone to go on modeling their own rest part.
I'm building a few shelves for spool rollers next to my V400 and I'm not using the spool holder on top of the printer. I changed the bowden tube to a longer one for easy insertion of filament (see pics). What I noticed was that even a…
printed in petg ~15% infill its easier to slide in from the top than the bottom, the torque on the rail arm holds the camera in place so you can slide it up and down and it should hold its place without a fastener. freecad file included…
Print with PLA, no support, i printed it with 4 walls. The Gripper is not perfect but holds tight.
Flsun V400 bottle holder for some sprays. I print it in PLA without support and 4 walls. The gripper is not perfect but grips tight enough.
Dies ist ein 18cm Ringlicht, es sind 2 Versionen vorhanden, eine dünne Version und eine mit mehr Wandstärke. Ich habe die Version mit weniger Wandstärke genutzt und es passt perfekt. Ich habe die LEDs direkt am Mainboard angeschlossen und…
Ein Mülleimer der aus 2 Teilen besteht, der Halter an sich und der Sicherungsring für den Müllbeutel. Ich nutze ihn für die ganzen Filament-reste die sich bei vielen drucken ansammeln. Print Settings: PLA 4 Walls 4 Bottom + 4 Top Layers…
This Projet is WORK IN PROGRESS If you like this project, take a moment to buy me a virtual coffee … To install the texture and printer silhoutte in PrusaSlicer, go to: Settings → Printer Settings → General → Bed shape → “Set…” Load the…
DE Webcam Halterung für die TRUST Trino HD Webcam 720p Die Webcam gibt es bei Media Markt oder Saturn für 9,99 Euro EN Webcam mount for the TRUST Trino HD webcam 720p The webcam is available from Media Markt or Saturn for 9.99 euro Print…
When I first saw the gap under the screw of the fan cover on the FLSun V400 effector, I thought it was a perfect spot for a led that would show the printer's state, just like the ones on the voron hotends. I designed a mount/difussor for…
The hotend front cooling fan shroud of the Flsun V400 has always reminded me of an ethnic warrior mask, or a reptilian or grey alien face. And now it's even more obvious! V400 emblem debadged to make room for the eyes. We don't need it as…
![[SKÅDIS] vacuum holder GÖTZE & JENSEN HV400](https://media.printables.com/media/prints/25d7fb1c-0428-409f-831d-849dcde3cac5/images/11575609_8b584b9a-262a-445a-b1d9-706770ff99d8_24446ceb-ebbf-4ab0-b2fd-cce8db39cedc/img_20251231_165654.jpg)
