1 / 2
ADXL FLSUN SR and v400 superracer large board and for v400. Trianglelab — image 1
1 / 2

ADXL FLSUN SR and v400 superracer large board and for v400. Trianglelab

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Re-mix for ADXL with usb included from trianglelbas

Rating
0 / 5
Likes
11
Downloads
86
Makes
0
Views
1,445
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

 

A modification for triangle lab adxl (larger board with usbC connector).  link.

FOR SR:

Modified to be mounted permanently. Leveling switch is not obstructed and sink fan exit is mostly free of obstructions.

BlownUp: thanks for preventing a waste of equipment.

For this mount you will need:

  • 4 M2x8mm screws to connect the ADXL and the outer piece of the mount
  • 1 M3x8mm screw to secure the mount in place
  • 1 M3 hex nut, for securing the mount in place

For V400:

2 m3x20mm.

2 m3 hexnuts.

4 shoth 2mm screws

Remove the screw that is holding the extruder plastic frame.

Remove the fame

Put a nut on the frame *Where the previous screw was)

On the printed mount put the middle screw and pass it throu the oval opening just below.

Put the hexnut to fix the second screw(leave some space)

Put the frame back to position. put the second screw through the upper hole it will fix the frame and the mount.

Put the adxl and 4 short screws of 2mm

Tags