1 / 4
Isopropyl Alcohol holder and shelf (honeycomb)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clearing up some flat surface space by mounting my alcohol bottle and pad / swab I use for cleaning off the print bed.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 142
- Wydruki
- 4
- Wyświetlenia
- 415
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 10)Remiksy (1)Kolekcje (60)Powiązane
Fits the 32oz bottle (78mm x78mm base) plus a little tray / shelf for the swabs I use. Printed with no flaws - about 7hrs print time with the settings I used.
Hope you Enjoy!
- 0.20mm from a 0.4 nozzle
- 15% gyroid infill
- Supports on the back only for the integrated honecomb wall inserts
- Printed in esun PLA silver
Modeled in Fusion 360. gcode file from PrusaSlicer intended for the MK4 printer.