Scuf Instinct Stick Wide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Analogue stick with wide thumb area for Scuf Instinct Pro.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This I made for the Scuf Instinct Pro I have but I guess it fits other Scuf-controllers. I wanted a larger thumb-area. Also form fitted thumb area. This is for putting Sugru (or similar) on top so you get a mold of your own thumb. I printed i PETG, not sure other materials are better/worse. Can't break mine yet even when I tried. Instead of sufru you can of course print your own dome preferably from som flex material with high friction. I made the bottom part small enough to be able to insert from top of cover as the top is too wide. Two part solutions I tried could be broken. If printing in this (I think preferred) orientation, make sure you exclude support from center as shown in 3mf. Use STEP-Files to modify your own stick.