Throwing Darts Vase mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vase Mode Throwing Dart
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 690
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Vase Mode Throwing Dart
somewhere between a lawn dart and a throwing knife,
its is designed to fit a nail with a head 8mm wide and a shaft 3.75mm
the nail head does not need to be cut off etc it should push right in from the back.
the nail used is 75mm long but that doesn't really matter
The shape has been specifically designed to work with vase mode, particularly around the tip it forms a more complicated shape, including an internal perimeter to support the nail, and a ribbed outer perimeter to strengthen the area under the most strain of impact.
The nail should not come out once its in place but there is a vase mode plug provided you can glue in behind the nail if this is an issue for you.
Print settings
0 bottom layers
0.6 extrusion width
0.1 layer height
turn down feed rate - print as slow as possible
Large brim