outdoor housing for LoraWAN sensor Dragino-LDDS75
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An rugged box for mounting the a Lorawan water level sensor type Dragino LDDS75.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This box is made to facilitate the mounting of a Lorawan sensor in areas of potential vandalism or natural forces. the slotted mounting holes provide multiple anchor possibilities.
Housing does not need to be water tight since sensor is already. massive build is to withstand drifting wood during floodings.
To be printed in PETG preferrably with 80% infill (around 800g total filament weight!)
The left top compartment (above the sensor) is big enough so fit the large replacement battery. we suggest to place an external connector to the LDS electronics and route the cable (an low resistance capacitor is still needed in parallel, can be fit inside the LDS)