1 / 10
outdoor housing for LoraWAN sensor Dragino-LDDS75 — image 1
1 / 10

outdoor housing for LoraWAN sensor Dragino-LDDS75

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An rugged box for mounting the a Lorawan water level sensor type Dragino LDDS75.

Rating
0 / 5
Likes
4
Downloads
43
Makes
0
Views
407
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This box is made to facilitate the mounting of a Lorawan sensor in areas of potential vandalism or natural forces. the slotted mounting holes provide multiple anchor possibilities. 

Housing does not need to be water tight since sensor is already. massive build is to withstand drifting wood during floodings. 

To be printed in PETG preferrably with 80% infill (around 800g total filament weight!) 

The left top compartment (above the sensor) is big enough so fit the large replacement battery. we suggest to place an external connector to the LDS electronics and route the cable (an low resistance capacitor is still needed in parallel, can be fit inside the LDS) 

 

Tags