1 / 18
br Spool Holder - my take on the Filler — zdjęcie 1
1 / 18

br Spool Holder - my take on the Filler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This spool holder is my version of a that works in HugoHuge's https://www.thingiverse.com/hugohuge/designs Filler…

Ocena
0 / 5
Polubienia
8
Pobrania
45
Wydruki
0
Wyświetlenia
283
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This spool holder is my version of a spool holder that works in HugoHuge's https://www.thingiverse.com/hugohuge/designs Filler Spool Holder ecosystem.

Look in my Spool Holder Collection at https://www.printables.com/@brass_ring/collections/713739 and https://www.thingiverse.com/brass_ring/collections/38795236/things to see my spool holder accessories.

All parts print without supports.

Required additional hardware:

  • 2 X 608 bearings
  • 1 X Filler brace for mounting the spool holder https://www.thingiverse.com/thing:3020026

The guide has the following additional features:

  • the bearings have taller side walls to keep them in place
  • there are slots to accept zip ties lock the roller assembly in place
  • the X100 mm size will work with Filler Spool Holder compatible rollers
  • it is marked for roller size
  • print with the bottom on the build plate

The roller:

  • has a thinner profile that is working well for me
  • it prints in two pieces to eliminate supports
  • it is marked for size
  • print with the end with the hole on the build plate
  • the size is the distance measured between stepped faces

The roller pin:

  • print with the unstepped end on the build plate

Category: 3D Printer Accessories

Tagi