1 / 18
br Spool Holder - my take on the Filler — image 1
1 / 18

br Spool Holder - my take on the Filler

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This spool holder is my version of a that works in HugoHuge's https://www.thingiverse.com/hugohuge/designs Filler…

Rating
0 / 5
Likes
8
Downloads
45
Makes
0
Views
283
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

This spool holder is my version of a spool holder that works in HugoHuge's https://www.thingiverse.com/hugohuge/designs Filler Spool Holder ecosystem.

Look in my Spool Holder Collection at https://www.printables.com/@brass_ring/collections/713739 and https://www.thingiverse.com/brass_ring/collections/38795236/things to see my spool holder accessories.

All parts print without supports.

Required additional hardware:

  • 2 X 608 bearings
  • 1 X Filler brace for mounting the spool holder https://www.thingiverse.com/thing:3020026

The guide has the following additional features:

  • the bearings have taller side walls to keep them in place
  • there are slots to accept zip ties lock the roller assembly in place
  • the X100 mm size will work with Filler Spool Holder compatible rollers
  • it is marked for roller size
  • print with the bottom on the build plate

The roller:

  • has a thinner profile that is working well for me
  • it prints in two pieces to eliminate supports
  • it is marked for size
  • print with the end with the hole on the build plate
  • the size is the distance measured between stepped faces

The roller pin:

  • print with the unstepped end on the build plate

Category: 3D Printer Accessories

Tags