1 / 2
Honeycomb Wall Holder for Pocket Laser Distance Measurer STANLEY TLM40 — zdjęcie 1
1 / 2

Honeycomb Wall Holder for Pocket Laser Distance Measurer STANLEY TLM40

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Honeycomb Wall Holder for Pocket Laser Distance Measurer / Rangefinder STANLEY TLM40

Ocena
5 / 5
Polubienia
12
Pobrania
56
Wydruki
1
Wyświetlenia
323
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a holder keeping your STANLEY TLM40 Pocket Laser Distance Measurer / Rangefinder nicely on your Honeycomb Storage Wall (HSW) for easy retrieval.

The device sits tight in the pocket - this is intended as I do not use it all too often and don't want it to wobble around. Just increasse the pocket size by 0.5 - 1mm on each side in the step file if you prefer a loose fit.

The pocket is 37mm x 20.03mm width a depth of 21mm, so any other object with max. these dimensions will fit.

 

How to print

The empty insert is already attached to the holder, so there is no need to print any additional parts.

Either use some support for the insert or - if you don't care how the insert looks like on the bottom side, simply print wihtout support and scrape off any unclean parts of the print (this worked absolutely fine for me, resulting in a good press fit).

I suggest to stick with the original suggestions for printing holders and inserts for the honeycomb wall: Use any material you like (I used red PETG), with layer height of 0.2mm, 4 perimeters and 20% infill. 

Tagi