Honeycomb Wall Holder for WD-40 Can (200ml)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Honeycomb Storage Wall Holder for a WD-40 Oil Can (200ml)
- Ocena
- 5 / 5
- Polubienia
- 194
- Pobrania
- 824
- Wydruki
- 11
- Wyświetlenia
- 2598
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cup-holder style holder keeping your WD-40 oil can nicely on your Honeycomb Storage Wall (HSW) for easy retrieval. The model was designed for the 200ml bottle (diameter 53mm).
If you own 100ml bottles, have a look here - my design is inspired by Andre's model for the smaller bottle: WD40 Holder for Honeycomb Storage Wall
What is needed?
- 1x print file ‘hsw_holder_for_wd40_200ml_can’
- 2x ‘insert-empty’ (from original Honeycomp Storage Wall)
How to print
Use support for the upper insert attached to the holder model - I used manual tree support in the Bambu Studio slicer to minimize material required for the support structure.
I suggest to stick with the original suggestions for printing holders and inserts for the honeycomb wall: Use any material you like (I used red PETG), with layer height of 0.2mm, 4 perimeters and 20% infill.
The inserts attached to the holder model will fit very tightly into the empty inserts - I used a hammer to press them into place.