1 / 3
Honeycomb Wall Holder for WD-40 Can (200ml) — image 1
1 / 3

Honeycomb Wall Holder for WD-40 Can (200ml)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Honeycomb Storage Wall Holder for a WD-40 Oil Can (200ml)

Rating
5 / 5
Likes
194
Downloads
824
Makes
11
Views
2,598
Reviews
10

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a cup-holder style holder keeping your WD-40 oil can nicely on your Honeycomb Storage Wall (HSW) for easy retrieval. The model was designed for the 200ml bottle (diameter 53mm).

If you own 100ml bottles, have a look here - my design is inspired by Andre's model for the smaller bottle: WD40 Holder for Honeycomb Storage Wall

What is needed?

  • 1x print file ‘hsw_holder_for_wd40_200ml_can’
  • 2x ‘insert-empty’  (from original Honeycomp Storage Wall)

How to print

Use support for the upper insert attached to the holder model - I used manual tree support in the Bambu Studio slicer to minimize material required for the support structure.

I suggest to stick with the original suggestions for printing holders and inserts for the honeycomb wall: Use any material you like (I used red PETG), with layer height of 0.2mm, 4 perimeters and 20% infill. 

The inserts attached to the holder model will fit very tightly into the empty inserts - I used a hammer to press them into place.

Tags