1 / 4
Paper embosser / stamp / punch for Adventure Race checkpoints
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple living hinge design for a paper stamp. 15 different symbols included
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 303
- Wydruki
- 2
- Wyświetlenia
- 3260
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (4)Kolekcje (99)Powiązane
Printing instructions:
- Layer height: up to 0.24mm for fast prints
- I recommend PETG for longer lasting hinges, but I used PLA and it works fine.
- The stl files are upside down, print them laying flat so you don't need supports.
- If you want more strength in the hinge, change the ‘Top/bottom line directions’ (cura) to all be in line with the hinge. (eg. [0, 0, 0])


Post processing:
Using a hairdryer, hot water or a heat gun carefully heat up the hinge. As soon as the hinge starts to become malleable, quickly fold the punch in place and let it cool down.
The design:
Originally created for a little Adventure Race (AR) my friend set up for his colleagues. The aim is to orienteer to the checkpoints (CP's) and find these ‘punches’ marked by a little flag. You punch the unique design in your ‘passport’ (a card to keep track of your aquired checkpoints).
In this case it's not a punch but an embosser.