1 / 4
Paper embosser / stamp / punch for Adventure Race checkpoints — image 1
1 / 4

Paper embosser / stamp / punch for Adventure Race checkpoints

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple living hinge design for a paper stamp. 15 different symbols included

Rating
5 / 5
Likes
81
Downloads
303
Makes
2
Views
3,243
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Printing instructions:

  • Layer height: up to 0.24mm for fast prints
  • I recommend PETG for longer lasting hinges, but I used PLA and it works fine.
  • The stl files are upside down, print them laying flat so you don't need supports.
  • If you want more strength in the hinge, change the ‘Top/bottom line directions’ (cura) to all be in line with the hinge. (eg. [0, 0, 0])
Post processing:

Using a hairdryer, hot water or a heat gun carefully heat up the hinge. As soon as the hinge starts to become malleable, quickly fold the punch in place and let it cool down. 

 

The design:

Originally created for a little Adventure Race (AR) my friend set up for his colleagues. The aim is to orienteer to the checkpoints (CP's) and find these ‘punches’ marked by a little flag. You punch the unique design in your ‘passport’ (a card to keep track of your aquired checkpoints).

In this case it's not a punch but an embosser.

 

Tags