Counting matching models…
Tento model jsem dělal v blenderu. Vrstva: 0,15 Podpěry: jsou potřeba Výplň: Je na vás
Print approx. €10.86–€13.28 excl. taxPreliminary estimate for one variant
Flsun Super Racer SR Feets for more stability 🦾 The model is at the exact same height as the original feets but you can increase or decrease the height easily in you slicer. Printed in TPU 82A and used in this video: Remixed from:…
Bracelet designed to be printed in TPU (the one on the photo has been printed with SainSmart TPU 95A).
Fiber optic spool holder with racetrack to manage extra fiber. I used this to extend my ISP's fiber and couple it into extra fiber in my house. Has a spot for a panel mount coupler as well. Print it on the bottom face and let the back…
printed 0.2mm layer height Overture High Speed TPU 230c nozzle 35c bed temp used magigoo on bed so easy to remove some very light stringing but falls off if you roll the band between thumb and index finger scale to fit in slicer example…
This sign is intended for fun and display in your home bar or mancave. best printed at .2 with color changes at .6, brown at 1.0, Black at 1.4 and gold at 1.5. The model that I published left off the last layer because the printer quit at…
When my kids were younger, they were totally hooked on Marblelympics. So I designed this marble ramp for them to hold their own marble races. There's also a fan stand for all the marbles to sit and watch the games, and a podium for the…
This stylish cuff bracelet features a bold bat emblem inspired by a famous superhero. Designed as a one-piece fanart model, it’s perfect for cosplay, collectors, or everyday geek fashion. The open design makes it comfortable to wear and…
my first try on a self designed bracelet.
A charming woven wicker bracelet design. Size to fit your wrist.
For all your crafting and tinkering needs. Perfect for friendship bracelets and cotton thread necklaces. I got the idea from https://www.printables.com/model/636506-necklace-bracelet-clasp-with-and-without-magnets/comments/1881039 but…
This hilarious and energetic 3D model features a wild cartoon racing car with giant eyes, a wide cheeky grin, sporty spoiler, and chunky wheels. It’s a fun and original design, perfect for collectors, racing fans, or anyone who loves…
DOWNLOADED MORE THAN ZERO TIMES! When you measure wrist size (or ankle, or whatever other body part for that matter) to make a bracelet and you make the bracelet that length, chances are… It will be too tight, or even too small entirely.…
This is my CO2 Dragster Race Car that is fully 3D printed and ready to assemble and race. It can be assembled fully without any external hardware or adhesives. This car was designed and constructed for the TSA Dragster Design contest. It…
TPU snake bracelet. Using new computer... Just getting used to blender on a laptop.. bit weird.
Print in place flat hinged straps, with interlocking snap tab and socket ends. Makes a pleasing fidget toy. Could be charm bracelets, choker necklace, bandoleer, etc. String jingle bells on zipties to the rings of one for a festive…
Because of an “accident” I needed a new door handle.
3D model of the Miami racetrack One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
Hlavičky houbiček s otvorem pro kulatinku.
use a zip tie and some dabs of glue to lock in place. tabs on mount key into frame.
Vytištěné rámečky se mohou nalepit na starou záclonu a to celé svázat dohromady. Doplnění mašlí a světélek se z toho vytvoří dekorativní dárek.
This one allows a little bit of extra headroom technically, but the other carriages disagree. Really, it saves plastic removing those triangle tips.
You can use : - The X between each blade to remove them - The T to put them against a wall - V's when you can't fit anything else
Introduction 2025 is the 10th anniversary of the infamous Benchy Test Boat. To celebrate, I connected my love of marble runs and designed this track. Combined with a spinning elevator, an arm extends from the motor and pushes the Benchy…
♾ Mix. Match. Click. Chic. ♾ Meet Linklet — the bracelet that loves to play dress-up as much as you do. These sturdy links are designed to snap together in endless ways and will not come apart unless you want them to. Go elegant with a…
The terrace door handle broke and had to be repaired, I went with a simple sturdy model printed in glossy black PLA. If you like the design, it is available in OnShape and has some parameters you can change:…
Print with ABS or another strong, temp resilient filament and a high infill setting.
footbike by one line - koloběžka jedním tahem
Hallo zusammen, anbei ein Schriftzug einer meiner Lieblingsserien... Jeder El-Barto Fan sollte ihn kennen ;) Einfach in gewünschter Größe ausdrucken und ankleben. Jede Datei muss 1x gedruckt werden. Grüße aus der Druckbar, Chris Print…
Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…
NIX63111 Motor mount brace for RC10 Graphite. Fits also NIX91.
just a remix of the headband brace, what I've changed about the headphones is that I've made the joint holes smaller so that it fits the pins better, and also moved it so it can slot into place, made the m3 holes bigger so that you don't…
My wife asked me for a bracelet holder. So I designed this one. Unfortunatly my white went empty, so it has 2 colors on the picture now. It's easy to print with some support material for the holder itself. I printed it with 15% Grid…
This plate can you helps with preparation on beads bracelet Pomůcka na výrobu korálkových náramků
This bracket can be used to reinforce joints in tables, frames, or other furniture. I printed with PETG. 0.24 layers. 3 walls. 15-25% infill. One side is 7cm long , other 3cm.
This canopy has been redesigned to accept a Flywoo 40A AIO, as well as a GPS (or a vifly mini buzzer if you prefer)
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
TPU Voronoi Bracelet Add a unique, modern accessory to your collection with this flexible Voronoi-style bracelet, designed specifically for TPU filament. The lightweight lattice pattern provides excellent flexibility while creating a…
Hi All, This model is something I've scratched up to allow you to mount your F1 Lego car vertically whether that be on your wall, bookshelf or any other surface.
Lockwasher.. thing for the DAA Racer magholder (I don't actually know what the name of this item is called). Mine broke almost immediately, and replacements seems hard to find. Suggest printing in something quite sturdy. I used PETG-CF.…
Basic Scan fix of Grabfigur by Niederösterreich 3D - Startseite Simple cleanup. noe-3d.at has amazing scans with a great amount of detail. Sometimes, as in this case, utilizing UV displacement is contraindicated.
This original idea was on one for the Voron, but I liked it so much I use it on all my printers now. The goal of this design was to, in the spirit of open source, allow people to make their own silicon brushes using all DIY parts. In this…
Falcon2 Pro Collection A TPU brace to hold your slats in place so they don't shift around when putting material on the bed to cut precisely. Print two sets to fully cover the slats in any orientation. Print as oriented. Default FLEX…
Death Racers are like remote-controlled Rock ‘Em Sock ’Em Robots! Drive them around and compete against two or more other racers to try taking off your competitor's head! The Death Racers were the brainchild of Michael Baddeley and Sam…
"Amor's Embrace" – Illuminated Decorative Box Description: Introducing "Amor's Embrace," a two-part decorative box designed to capture the essence of love and romance. The base features an intricate rose relief, symbolizing passion and…
Protection kit for XC Tracer Maxx II. (Paragliding variometer) USB-C & cord feed-through exempted With prusa slicer you can easily add your name in the top. (Individualisation)
The Ikea Komplement divider for the 40 cm depth Pax (804.675.65) have a tendency to look disorderly. This brace fixes that.
Wasn't too fond of anything of the sorts that was available to print, so I decided to take my own spin on it. Prints easy on its side with a support for the middle section. I used the tried and true 0.6mm nozzle which gave me two walls.…
Death Racers are like remote-controlled Rock ‘Em Sock ’Em Robots! Drive them around and compete against two or more other racers to try taking off your competitor's head! The Ares model is the second iteration of a Death Racer featuring a…
Introduction The racetrack tuner is a capacitive coupler for short transmitting loop antennas. The name is refering to its racetrack form. Racetrack Circus Maximus in Rome - maybe I should call it ’Maximus Tuner’ :-) For use by certified…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Why I designed my own retainer case: Most of the ones I…
This 3D model represents a sleek and functional wall mount designed for a single Formula 1 collectible race car. The design focuses on secure display, ease of installation, and preserving the model's aesthetic appeal. This model offers a…
FLSun Super Racer - HGX Lite Housing / Mount (no inserts)
Introduction 2025 is the 10th anniversary of the infamous Benchy Test Boat. To celebrate, I connected my love of marble runs and designed this track. Combined with a spinning elevator, an arm extends from the motor and pushes the Benchy…
Artful Simplicity: Captures the feminine form using smooth, flowing contour lines in a minimalist style. Print-Optimized: Designed for clean 3D printing with balanced line thickness and minimal support needs. Stylish Accent: Ideal for…
This mystical engraved bracelet is a true eye-catcher! With detailed patterns inspired by ancient symbols, spirals, and nature, it brings a touch of magic and mystery to your wrist. The open cuff design ensures flexibility and comfort for…
This hilarious and energetic 3D model features a wild cartoon racing car with giant eyes, a wide cheeky grin, sporty spoiler, and chunky wheels. It’s a fun and original design, perfect for collectors, racing fans, or anyone who loves…
A simple mount for Dynaplug Racer Pro. This is designed to be relatively low profile. EDIT: 4/30/2026 -- Added an inline mount version. This model has 20mm of built-in adjustment. It is based on a 40mm tube diameter, with the Dynaplug…
This stylish cuff bracelet features a bold bat emblem inspired by a famous superhero. Designed as a one-piece fanart model, it’s perfect for cosplay, collectors, or everyday geek fashion. The open design makes it comfortable to wear and…
Race track safety system for 1/76 - Turbo Racing rc car Collections available Losi MicroT Spinner & Fidget Arrma RC Earrings
My Ender V3 SE's gantry was completely out of whack. maybe 92° leaning to the back. So I looked for solutions. I did not find one I liked. It took me about a week to design and test this. The braces fit precisely to the Ender's plastic…
Can be printed full or separately, if anyone knows how to make a perfectly smooth cylinder on Blender without causing surface issues, please help. Most noticeable on the head If you print in pieces, the order of assembly is Face (Yellow)…
Saturn V Rocket Printable Board Game Scale Space Race Micro Miniature
Soviet N1 Rocket Printable Board Game Scale Space Race Micro Miniature
Gemini Capsule Printable Board Game Scale Space Race Micro Miniature
Apollo LM Lander Printable Board Game Scale Space Race Micro Miniature
NASA Explorer Satellite Printable Board Game Scale Space Race Micro Miniature
Apollo Command Module Printable Board Game Scale Space Race Micro Miniature
Vostok Rocket Printable Board Game Scale Space Race Micro Miniature
a small thing that holds your bracelets and builds pressure in about 2 hours.
This is a part for a SPECIFIC pistol kit ONLY: The SS80 80% Glock 43 Kit with the thin, interior triangular relief cut that allows the slide lock lever to shift laterally side to side, causing it to slide off of an empty magazine nub.…
Top Bar Punk Bracelets : For Common 1 Inch Top Bars Yea the only way to get these around the bar would be to use flex + Look at it can you imagine landing on that spiked one. Soft Flex only. Resize as needed.
This is a simplified 3D model of the legendary Ferrari 250 GTO, considered one of the most beautiful and successful racing cars of all time. Designed with smooth contours and reduced fine details, this version is perfect for mold-making.…
This is a simplified 3D model of the legendary Ford GT40, a dominant force in endurance racing, particularly at Le Mans. Designed with smooth contours and reduced fine details, this version is perfect for mold-making. Ideal for creating…
I purchased a Motion Pro 08-0550 Steering Head Bearing Race Driver Set and wanted a holder to put them in my toolbox, the race adapters snap in place.
Relive motorsport history with this striking 3D printable model of the legendary Ford GT40, presented in a dramatic reveal, shrouded in a sleek black cloth. This model is a must-have for racing aficionados and for creating captivating…
wanted to use this model for a wall of bookshelf + hotwheels display for a kindergartener
Own a piece of motorsport legend with this 3D printable STL model of the Ferrari 250 GTO (Series I) 1962. This legendary race car model is perfect for automotive enthusiasts and motorsport fans looking to display a pinnacle of classic…
Own a piece of motorsport history with this 3D printable STL model of the Mercedes CLK GTR. This legendary GT1 race car model is perfect for motorsport enthusiasts and collectors of iconic racing machines, showcasing aggressive…
Experience the cutting edge of motorsport technology with this 3D printable STL model of the Porsche 919 Hybrid. This Le Mans prototype racer model is perfect for motorsport enthusiasts and fans of endurance racing, showcasing innovative…
New race body for v1.1 chassis of RUDE. Can be printed both standing without supports and laying flat with supports enabled. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out…
New race body for Experimental Chassis of RUDE. Version 1.0 Chassis attached as reference. Can be printed both standing without supports and laying flat with supports enabled. If you would like to support me - you can buy me a coffee :)…
Cache esthétique pour trak racer TR160 2 modéles un avec ergot à clipser mais surépaisseur un avec cache en biseau et pièce découpé. Nécessite pistolet à colle pour tenir bien, pas de surépaisseur , lisse le petit cache doit être imprimé…
a monitor mount for the rk1 sim rig needs M12 2PCS, 70mm https://ar.aliexpress.com/item/1005008081039320.html?spm=a2g0o.order_detail.order_detail_item.7.74e0f19c8F03Pa&gatewayAdapt=glo2ara
Remix of an excellent print. This gives printers an MMU compatible, dual colour option of the kumihimo 8 slot disk for bracelet making
Mounting plate and support/brace to complement HPGlass 's bench roller model. I didn't have PVC pipe on hand but I had plenty of M3 hardware laying around. Support rod needs 2x M3 FHCS screws. Any length between 10-15mm should be fine.…
Toygun: https://www.taiwangun.com/de/maschinengewehre-aeg/we23-slbb-rotary-minigun-style-sportsline-replica-echo1 Used Tracer: https://www.taiwangun.com/de/tracer-einheiten/bbp-shotgun-blast-tracer-24mm-5ku The barrel ist not centered on…
Print with ABS or another strong, temp resilient filament and a high infill setting.
This remix adds two notable upgrades to the original bracelet design: – One side now features a subtle line pattern for a modern and refined look. For this textured surface, gentle “ironing” is recommended. The parts were rotated 60° on…
Essencial things besides print: TPU filament non printed, lenght = circumference + approx. 10 mm for sealing super glue magnets, or M2 bolt and nut soldering iron Print settings: middle parts count: (lenght of TPU belt before sealing - 25…
Camera link (aliexpress): https://it.aliexpress.com/item/1005007487050657.html?spm=a2g0o.order_list.order_list_main.353.56743696wTfaux&gatewayAdapt=glo2ita
Steering column mount this steering column: https://www.speedwaymotors.com/Steering-Column-Mounting-Bracket-3-4-Inch-Shaft-1-25-1-75-Inch,461403.html This is made for the nexgenefi display but if you have basic cad skills this could be…
This is the racer flown by Ace Pilot Hype Fazon in the show Star Wars: Resistance. It has moving wings that lie flat for landing and fold ~45° up during flight, which might seems a bit counter-intuitive. But it's apparently effictive,…
