Table angle bracket / corner brace (LACK-compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.25 – €1.53 net (excluding VAT)
For file: Lack Bracket - 100mm_0.3mm_PETG_MK3S_1h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.39 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 1.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Angle bracket / corner brace to stop table shaking during prints, especially on higher speeds IKEA LACK compatible
- Rating
- 4.885 / 5
- Likes
- 195
- Downloads
- 1,185
- Makes
- 28
- Views
- 4,008
- Reviews
- 26
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Light tables like IKEA LACK family are not sturdy enough to withstand horizontal vibrations caused by a printer, they start shaking and wobbling worsening print quality, causing even more ringing, etc. This simple brace will make a table MUCH more stable.
The holes are designed for 4x16mm (or longer) tapered screws.
Be careful, the table is mostly air inside, don't overtighten the screws.
I printed this using Prusament PETG Signal White, but PLA would do as well as there's not much load on these elements.
0.30mm Layer height, Draft quality.
Depending on your conditions (drafts, enclosure, etc.) you might want to consider a 3-5mm brim to prevent corner lifting.
Please LIKE if you like :D
p.s. Feel free to request other sizes.