Knife sharpener guide body 10mm - Print-in-Place - M5 Setscrew
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variation of the 10mm guide body, that uses an M5 screw and nut instead of the printed set screw.
- Ocena
- 4,25 / 5
- Polubienia
- 20
- Pobrania
- 127
- Wydruki
- 4
- Wyświetlenia
- 712
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
The M5 Screw and Nut Variation of the Knife Sharpener Guide Body is a modified version based on badpassword's 10mm guide body design, originally created for the Knife Sharpening Tool by CNCKitchen.
This modified model eliminates the need for a printed set screw and instead utilizes a M5 bolt and nut for securing the body onto the rod. To prevent any potential scratching, a printed moving barrier is included between the bolt and the fixed body.
Notably, if you opt to use the Knife Sharpening Tool remix by @Bas_1189, you can repurpose the HolderKnob designed for the M5 screw.