MX-5 Miata ND mobile phone holder (base)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone holder for MX-5 as base for other holders (e.g. magnetic holder)
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 313
- Wydruki
- 2
- Wyświetlenia
- 1932
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I was in search for a phone holder for my Miata MX-5 ND. The only ones I found were ugly or required glueing or screwing something to the panel.
Therefore I designed my own. This one is just clipped as you can see in the pictures. The pictures show it with a mounted magnetic holder I already had (removed bottom plate and thus could fix the ball with the holder using a screw).
As I believe in free stuff I also added the original Freecad file just in case you have to make modifications.
I printed it using Formfutura AplloX ASA with 40% gyroid infill. This worked for me
Have fun with it.
Update 2023-10-07: Added High and Medium version (for bigger phones). Updated also FreeCAD file. Pictures show Low version.
Update 2023-11-06: Increased diameter for screw heads, so more screws should fit. Changed HIGH version a little bit. Added also balls (in two sizes) for use with holders originally intended for vent outlets. These balls are intended to use with mold-in threads (for 4 mm screws).