LTT Screwdriver Magenetic Storage Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I saw a few existing options for cases but none were exactly what I wanted, so I made this.
I used the excellent reference model of the screwdriver itself by MiniMadRyan to get the overall dimensions and the imprint in the inside of the case.
The outer shell can be printed out of whatever you like, just consider that it may warp with warping-prone filaments. The inside should ideally be printed in TPU but I think other filaments would work too. Hard filaments will probably scratch the handle a little. If you use a hard filament you might want to scale the outer shells up ever so slightly because the model has zero tolerance between the inside and outside shell. That works fine with TPU but it might not work as well with hard filaments.
You'll need 6 6x3mm round magnets. They should press fit, but if they are loose you can glue them with super glue.