Chuck Key Holder for Harbor Freight 20" 12 speed Production Drill Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a chuck key holder for the Harbor Freight 20 In. 12 Speed Production Drill Press. It attaches to the bottom of…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a chuck key holder for the Harbor Freight 20 In. 12 Speed Production Drill Press.
It attaches to the bottom of the belt enclosure using the screw and nut for either of two front wire clamps, either left or right.
The chuck of the 20" press is quite large, supporting bits with shanks up to 3/4". It's unlikely that this key holder will fit many other machines. The long end of my keys handle measured 9.7mm. The hole in the holder measures 10mm. If your chuck key isn't nearly 10mm, this model is not your guy...
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Filament: Amazon Basic's PLA Orange
Notes:
Print as oriented in STL without supports.
Category: Machine Tools