Wico Arcade Joystick Guard Actuator - Screw In Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guard Actuator for Wico Arcade Joysticks - Screw In Style Created by Outpost Kodelia…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Guard Actuator for Wico Arcade Joysticks - Screw In Style
Created by Outpost Kodelia (https://www.thingiverse.com/OutpostKodelia)
License: Creative Commons - Attribution
This is designed to fit in a standard Wico joystick between the leaf switches and
the joystick shaft. This is a direct replacement. We could not find this for
purchase anywhere, so we felt it was acceptable to create our own replacement.
We have printed this and use it. See the attached photos.
v0.1 - Initial creation.
Print recommendations:
- Supports: No
- Print at high resolution (recommend 0.1 or 0.05 layer height)
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.10 mm
Infill:
100%
Notes:
The main body is thin, and you probably won't get enough layers for strength if you use a layer thickness greater than 0.10mm.
Category: Video Games