Filament blended Roman bust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first attempt at a black-and-white filament blend from a photo
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 388
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
I took a photo in the Istanbul history museum of a diorama of Roman busts found throughout the city. Even though the photo wasn't black and white, I thought it would be a good basis for a black-and-white blended 3d print to see what kind of resolution I could get.
This is a 2mm thick print. From 0 to .96mm you will need to print with black filament. For .96 through the top of the print, use white filament. You need to set up either a pause in your slicer, or if you have an MMU or AMS, have it change filaments at .96mm
I printed with a resolution of .08mm using a .4mm nozzle.