Filament blended Roman bust
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my first attempt at a black-and-white filament blend from a photo
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 388
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
I took a photo in the Istanbul history museum of a diorama of Roman busts found throughout the city. Even though the photo wasn't black and white, I thought it would be a good basis for a black-and-white blended 3d print to see what kind of resolution I could get.
This is a 2mm thick print. From 0 to .96mm you will need to print with black filament. For .96 through the top of the print, use white filament. You need to set up either a pause in your slicer, or if you have an MMU or AMS, have it change filaments at .96mm
I printed with a resolution of .08mm using a .4mm nozzle.