1 / 1
Gridfinity 1x1 Allen Key Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity 1x2 Allen Key Holder I quickly modelled up to hold the allen keys that came with my Sovol SV06
- Ocena
- 4,6 / 5
- Polubienia
- 26
- Pobrania
- 275
- Wydruki
- 5
- Wyświetlenia
- 868
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (0)Kolekcje (57)Powiązane
Gridfinity 1x2 Allen Key Holder I quickly modelled up to hold the allen keys that came with my Sovol SV06
Holds: 1.5mm, 2mm, 2.5mm, 3mm, 4mm
I printed this in PLA with 0.2mm layer height, 3 walls, 10% infill and 4 top and bottom layers. No supports needed unless you want to use the screw holes. In that case I'd recommend painting some in those spots.
Created with help from the parametric FreeCAD gridfinity file that I've linked as a remix.