Returned the Classic phone plate to the remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This variation puts the phone plate from the original creation.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The modification puts the original phone plate in the phone holder.
The locking pin mechanism is the cool feature I wanted to take advantage off and change nothing else.
There are two STL's.
One is the variation with the original phone plate.
The liliana file has a modifiction that thickens the lower rod that connects the two lower tabs together. While printing with Polymaker Matte Pink Filament, the piece would break and failure ensues. With this modification you can print with more brittle PLA without supports at the cost of some design cleanliness.
I recommend printing with at least 3 perimeters, possibly 4. Mainly you want to give the pin more mass so it does not break.
Once the part is printed, you break the holding supports by pushing the pin.