1 / 1
Returned the Classic phone plate to the remix — image 1

Returned the Classic phone plate to the remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This variation puts the phone plate from the original creation.

Rating
0 / 5
Likes
11
Downloads
113
Makes
1
Views
299
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The modification puts the original phone plate in the phone holder.

The locking pin mechanism is the cool feature I wanted to take advantage off and change nothing else. 

 

There are two STL's.  

One is the variation with the original phone plate.

The liliana file has a modifiction that thickens the lower rod that connects the two lower tabs together. While printing with Polymaker Matte Pink Filament, the piece would break and failure ensues.  With this modification you can print with more brittle PLA without supports at the cost of some design cleanliness. 

 

I recommend printing with at least 3 perimeters, possibly 4.  Mainly you want to give the pin more mass so it does not break.  

 

Once the part is printed, you break the holding supports by pushing the pin.