Voron Full Panel Front Door Latches for ~3/4" Aluminum Stair Moulding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hinged latches and clips for cube style 2020 frame machines utilizing hardware store aluminum molding.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 723
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Full panel door clips for voron or cube style frames. They are offset from the frame enough to allow for quick release side clips. It works in that regard, the side clips need to be unclipped with these closed, its fiddly but works.
They utilize standard hardware store stair molding, last time i got some it ran 5-8 for a 8' section, and comes in various finishes, the piece i had sitting around was 29.4mm wide on the flat side, you may want to print one and take it to the store and check the fit, but every piece i have around here has been the same dimensions.
There are multiple depths, I made mine at 9.5mm and with standard 3/16 insulation were a touch loose but functional. So they are available from 5-9mm depending on your molding. Works better than i had hoped actually. And the released files are unembossed, unlike the renders. The foam isn't required on the outside unless they are a touch loose, and works better as a small horizontal strip top and bottom.
There are screw holes in the molding side to add set screws but weren't needed with mine.