Wham Bam 24l Silica Inserts, Filament Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Breathable inserts to line the bottom of Wham Bam's 24 litre box. Ideal for filament storage.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Inserts for the bottom of this 24l box, by Wham Bam:
https://www.amazon.co.uk/Wham-Bam-Recycled-Resistant-Storage/dp/B07RQYZSMX/
Ideal for filament storage. The front has a recess for a M3 x 4mm Length x 5mm OD threaded insert, though in the end I didn't find this necessary.
I also printed clips for the main box and filled some little gaps in the lid with silicone, but this is purely optional.
Print two of each file.
To create the mesh for the lid in PrusaSlicer:
- Ensure you are in Advanced or Expert Mode
- Right click the object in the right hand list
- Select both Infill and Layers and Perimeters
- In the Infill Menu, which appears bellow, set fill density to around 30% and Fill Pattern to Rectilinear (you can play around with this but these are the settings which work well with my silica which are 3-5mm)
-In the Layers and Perimeters Menu set both Bottom solid layers and Top solid layers to 0