20 modeli
I bought a WhamBam magnetic PEX buildplate for my CR6 and wanted to punch holes in the magnetic sticker for the build plate screws. This is NOT exact measurements for the screws, but it was good enough for my purposes.…
I designed this vent system for the WhamBam HotBox to vent fumes out my office window, particularly when printing filaments like ABS. It uses a 75mm 12V blower fan, some 1/2" ID flexible tubing, and optionally hose clamps to help keep…
Posted with permission from WHAMBAM To add support for that backplate to the ApolloLander shroud I had to model the backplate in CAD, couldn't find a full model so I made one. I made two variations, one with modeled threaded holes (M3),…
I wanted to get a magnetic build plate for my Photon Mono M5, but WhamBam only had it for the M5S. After a bit of research, and determining that the build plates are the same size, I decided to give it a try, and it seems to work…
Warning : At time of publishing this model is untested with an actual whambam3d build plate. Be careful to read all instructions before you start and follow them as written. You can damage your 3d printer if you are careless The WhamBam3d…
Made this as I wanted to use the LACK table I had. The HotBox is slightly larger than the table surface, so it was not possible to put it directly on. There will therefore be a small gap between the table and the box. Have tried to…
This is a direct drive bracket for the Mutant system that allows a BMG direct drive connection. I did this setup with a BMG-M using a slice Magnum, But any BMG direct would work. Print instructions PETG Best - 3 walls 25%.
This is a plotter head module for the WhamBam Mutant system Prints very well in PLA. I used two 2inch smooth finishing nails as the guide rails for the middle section - (and 2.4mm smooth should work) print the floating section with 20-30%…
These are the files to mount a BMG extruder with an E3D v6 hotend onto a WhamBam Mutant V2 They have been modified from the original model created by Mad Monkey for a BMG and a Mosquito hotend, and take heavy inspiration from the Prusa I3…
This design lets you attach your WhamBam Mutant tool plates on your pegboard. It is made for a US/Canada pegboard size, where holes are 1" apart (STEP included if you need to remix it for another pegboard style). It's an easy print with…
This is a P.I.N.D.A. probe mount for the WhamBam Mutant v2 mobile plate. Designed to work with the BMG direct drive. Available with or without the wire guide designed to work with the bmg direct drive mount:…
Simple remix, I don't know what else to say other than thank you Dsk001 for the original upload, you saved me lots of time :) <3
This prevents the PTFE tube from being pushed out of the Orbitor between the nozzle and the Orbitor. Over a year ago, I installed the WhamBam Systems Mutant on my CR-30 because my original backplate broke. I used Nak3D's Muntant design…
Spacer for the Z Limit switch on the AnyCubic Photon S when using the WhamBam Flex Plate system Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Any PLA Black Category: 3D…
I remixed the fan mount to get the fan duct into just the right position for a E3D V6 setup. The original model was a little offset and not low enough. My 12v setup struggles with heating if the fan duct hits the heater block at all so I…
Mine imported at the wrong origin in PrusaSlicer. I've moved it using meshmixer
I've wanted to add some lighting to my i3 Mk3s+ and designed 2 brackets to attach to the frame and fit the WhamBam LED bar. V1 is a front side mount and V2 is back side mount. V1 may be in the way of the print head if you're printing to…
Simple plugs to stuff the filament holes of the Wham Bam HotBox. In one plug I have added a hole that serves as a filament guide.
