MightyWrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This makes turning the knobs for YakAttack MightyBolts much easier. Compatible with both convertible and LoPro knobs.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a wrench for the YakAttack knobs for their MightyBolts. I get frustrated sometimes when one of these knobs becomes too tight to adjust by hand while on the water. Pliers can sometimes get the job done, but this oversized knob does the job well. Carry one of these and never be caught on the water with a stuck MightyBolt. It is compatible with both the standard convertible knob or the Lopro WingKnob.
The model is designed to be printed with the narrow end on the build plate without support. It has been designed with extra walls around the tool end to ensure it does not buckle under stress. Walls and infill for the rest of the part can be kept low (2-3 walls, ~15% infill).