Wall Mount - Knew Concepts Mk.3 Fret Saw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall hook for the Knew Concepts Mk.3 Fret Saw
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This little hook can be mounted with 2x #8 3/4" countersunk screws. It has enough projection off the wall to work with all the different SKUs of the saw, but only with the blade-holding knobs facing away from the wall.
The throat is 3.5mm, just enough to leave a little play, but doesn't let the saw rock front to back much. It's wide enough that balance is not super difficult to find, but a second hook a few inches away can fix that problem entirely.
Requires about 12mm (~1/2") of room above the saw when installed to get it on and off.
Printed with 0.15mm quality preset on MINI+ with marble PLA. Make sure to rotate the model so that one of the sides is on the print bed.