Wall Mount - Knew Concepts Mk.3 Fret Saw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall hook for the Knew Concepts Mk.3 Fret Saw
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 45
- Makes
- 0
- Views
- 265
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This little hook can be mounted with 2x #8 3/4" countersunk screws. It has enough projection off the wall to work with all the different SKUs of the saw, but only with the blade-holding knobs facing away from the wall.
The throat is 3.5mm, just enough to leave a little play, but doesn't let the saw rock front to back much. It's wide enough that balance is not super difficult to find, but a second hook a few inches away can fix that problem entirely.
Requires about 12mm (~1/2") of room above the saw when installed to get it on and off.
Printed with 0.15mm quality preset on MINI+ with marble PLA. Make sure to rotate the model so that one of the sides is on the print bed.
