1 / 1
Frosthaven Trapper Traps
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetically connecting traps for the Trapper in Frosthaven, allowing multiple status effects.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
The Trapper's traps in Frosthaven can have many different effects. These magnetically connecting traps should help with that. The base rotates to indicate the heal/damage value and you can stack as many status effect hands on top as you like.
Note: I intentionally did not add muddle, since that's only available at level 7 (which I never play to) as it just made the symbols too small (IMHO). If people would like me to add it, ask and I will make a top design for it. :-)
Assembly:
- I used 3x1mm magnets which I got in a pack of 300 for ~$15CAD on amazon.
- Adjust the magnet diameter until you get a nice snug push fit.
- I printed the art work on normal 100gsm paper, then glued it on with Rubber Cement. I found that Rubber Cement is good for not bleeding through the paper and gives a good hold with both the plastic and paper.
- Optionally, you can spray on a clear coat to seal everything. I did not do this as I wanted the magnets to have as little between them as possible.