1 / 1
Frosthaven Trapper Traps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetically connecting traps for the Trapper in Frosthaven, allowing multiple status effects.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 76
- Makes
- 0
- Views
- 1,182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution — Share Alike
The Trapper's traps in Frosthaven can have many different effects. These magnetically connecting traps should help with that. The base rotates to indicate the heal/damage value and you can stack as many status effect hands on top as you like.
Note: I intentionally did not add muddle, since that's only available at level 7 (which I never play to) as it just made the symbols too small (IMHO). If people would like me to add it, ask and I will make a top design for it. :-)
Assembly:
- I used 3x1mm magnets which I got in a pack of 300 for ~$15CAD on amazon.
- Adjust the magnet diameter until you get a nice snug push fit.
- I printed the art work on normal 100gsm paper, then glued it on with Rubber Cement. I found that Rubber Cement is good for not bleeding through the paper and gives a good hold with both the plastic and paper.
- Optionally, you can spray on a clear coat to seal everything. I did not do this as I wanted the magnets to have as little between them as possible.