1 / 3
4x4x1.25 Bambulab Carbon X1 outside magnetic HEPA filter holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed it for a different type of HEPA filter, the one I could buy from mexico.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
Use four 8x3mm N35 magnets, they work fine for this model.
The Amazon link claims this filter is 4x4x1 but it actually measures 4x4x1.25 that's why this model may look slightly deeper than needed, the filter fits snug in this holder.
https://www.amazon.com.mx/dp/B09P4XZXX7?psc=1&ref=ppx_yo2ov_dt_b_product_details
Printed in Army Green, Polylite ASA. 0.2 mm strength settings.