1 / 1
V0.2 VORON 0.2 X Carriage with X Endstop and A Drive with Y Endstop
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VORON 0.2 with X and Y endstop
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 689
- Wydruki
- 3
- Wyświetlenia
- 3987
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (0)Kolekcje (119)Powiązane
The officially released Voron 0.2 X and Y limit switches are implemented using an unlimited switch method. If your motherboard does not support the unlimited switch solution or if you still prefer to use limited switches, you can replace the X Carriage and A Drive A Frame Lower components, and install limit switches on each of these parts and also you need to install the X Endstop Bumper component.
What you need:
M2*10 self tapping screw 4
M3*16 BHCS 2