Moka pot leveler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Moka pot leveling made easy and (mostly) hassle free
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 133
- Wydruki
- 2
- Wyświetlenia
- 1567
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Very basic remix of Dodoka's model, 90% of the work was already done.
Fits a x6 cups Bialetti moka with 65mm (outer) diameter coffee container.
Scaling the part for other sizes of pots should just work: measure your coffee container, scale X&Y in your slicer, print.
With this remix you can't adjust directly the quantity of coffee any longer; still if you use an electric grinder the overall process is quite simple:
- put the leveler on the coffee cup
- fill some coffee directly through the leveler
- rotate the leveler till coffee gets evenly spread
- repeat 2/ and 3/ till appropriate level is reached
The part was remixed directly in PrusaSlicer 2.6.0 but for some reasons it segfaults while exporting the stl, I can't therefore provide the stl file.
Print settings:
- PETG, 0.4mm nozzle, 0.2mm layer height
- 100% infill (as many perimeters as needed to get rid of infill)
- Support needed for the arms of the “propeller”
- Concentric top and bottom fill patterns