Moka pot leveler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moka pot leveling made easy and (mostly) hassle free
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 133
- Makes
- 2
- Views
- 1,567
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Very basic remix of Dodoka's model, 90% of the work was already done.
Fits a x6 cups Bialetti moka with 65mm (outer) diameter coffee container.
Scaling the part for other sizes of pots should just work: measure your coffee container, scale X&Y in your slicer, print.
With this remix you can't adjust directly the quantity of coffee any longer; still if you use an electric grinder the overall process is quite simple:
- put the leveler on the coffee cup
- fill some coffee directly through the leveler
- rotate the leveler till coffee gets evenly spread
- repeat 2/ and 3/ till appropriate level is reached
The part was remixed directly in PrusaSlicer 2.6.0 but for some reasons it segfaults while exporting the stl, I can't therefore provide the stl file.
Print settings:
- PETG, 0.4mm nozzle, 0.2mm layer height
- 100% infill (as many perimeters as needed to get rid of infill)
- Support needed for the arms of the “propeller”
- Concentric top and bottom fill patterns