Pin2DMD LED Display frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a frame to mount two P2.5 64x32 led video panels side by side for use in a pinball machine. The first layer is…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a frame to mount two P2.5 64x32 led video panels side by side for use in a pinball machine. The first layer is solid because I had better bed adhesion when the print head wasn't skipping around to layout the holes. The openings are easily cut out with an x-acto knife after printing. The center mounting hole is modeled to take an 8/32 nut and screw so if there is any flex in the panel when mounted it can be leveled out.
I used this to build a pin2dmd color display: www.pin2dmd.com
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20
Filament: solutech3d pla black
Category: Electronics